Pipes are not eternal materials, and the communication system needs periodic renewal. Steel and cast iron pipes are gradually giving way to plastic pipes, which have many more advantages:
Smoothness. On the inside, the walls are perfectly smooth. This enables waste and water to pass through the pipes without obstruction and the chance of blockages is minimal.
Weight. The construction is sufficiently light. Even one person can work with it, which makes sewer pipe installation in Los Angeles relatively inexpensive.
Absence of rust. Pipes that contain iron begin to rust with time. Leaks form in the areas where corrosion occurs and must be repaired. Polymer models do not leak, which is another vote in their favour.
High maximum temperature limit. The material has a melting point of plus 175 degrees Celsius. This property allows waste material to be transported at a high temperature through the pipes. This makes them indispensable in specific industries.
Promptness of installation. The installation of water pipes in LA is fast. The total time of work depends on additional factors that our consultant or the master himself will tell you about during the inspection of the facility.
Ease of maintenance. Pipes do not need to be painted. All maintenance is simply wiping with a damp cloth to prevent the formation of dust deposits.
How are the sewer pipes replaced?
The first step in replacing water pipes is dismantling work, in which the old communication systems are removed. The further process follows the following algorithm:
The riser pipe is assembled and installed.
Installing the pipes. These are laid out in all rooms and to all nodes where they may be needed. Usually, a wiring plan is drawn up in advance so that there are no surprises. The connection to the plumbing is made after the connections have been fully installed.
In order to avoid internal stresses, the fixing is combined: rigid and floating.
There are a few tips on how to make sure that the installation meets all regulations:
The pipes are installed in the opposite direction to the flow of effluent. This prevents leaks.
The gradient of the entire drainage system is made towards the riser pipe.
The preformed details remain unchanged. Their shape and dimensions are constant.
The riser pipe and branch pipe must not be connected at an angle of 90 degrees.